Comparison of Derbi GP1 50 2010 and Honda Lead 110 [S]ave
| Attribute |  Honda Lead 110 × |  Derbi GP1 50 2010 × |
|---|---|---|
| General | ||
| Production from (year) | 2012 | 2010 |
| Make | Honda | Derbi |
| Model | Honda Lead 110 | Derbi GP1 50 |
| Category | Scooter | Scooter |
| Engine and transmission | ||
| Engine type | Single cylinder, four-stroke | Single cylinder, two-stroke |
| Valves per cylinder | 2 | - |
| Fuel system | Injection. PGM-FI | Carburettor. 17.5 mm |
| Displacement (cm³) | 107 | 49.4 |
| Power (kw) | 6.5 | - |
| Cooling system | Liquid | Liquid |
| Transmission type,final drive | Belt | Belt |
| Torque (Nm) | 9.3 | - |
| Bore (mm) | 50 | 40 |
| Stroke (mm) | 55 | 39.3 |
| Gearbox | Automatic | Automatic |
| Fuel control | Single Overhead Cams (SOHC) | - |
| Driveline | V-matic | - |
| Ignition | Fully transistorised electronic | Electronic C.D.I. |
| Clutch | - | Automated |
| Lubrication system | - | Separate mixing with mechanical oil pump |
| Compression | 11.0:1 | 10.5:1 |
| Chassis | ||
| Front suspension | 33mm telescopic fork, 80mm axle travel | Upside down hydraulic fork. |
| Rear suspension | Single-damper unit swingarm, 70mm axle travel | Monoshock. |
| Front brakes | Single disc. Combined dual-piston calliper, drilled rotor and resin mould pads | Single disc |
| Rear brakes | Expanding brake (drum brake) | Single disc |
| Diameter (mm) | 130 | 175 |
| Front tyre | 90/90-M12 | 120/70-14 |
| Rear tyre | 100/90-M10 | 140/60-13 |
| Seat | 2-person seat | - |
| Wheels | U-section 5-spoke cast aluminium | - |
| Front wheel travel (mm) | 70 | 80 |
| Rear wheel travel (mm) | 80 | 70 |
| Other | ||
| Starter | Electric | Electric |
| Color options |
|
|
| Dimensions | ||
| Wheelbase (mm) | 1,275 | 1,330 |
| Kerb weight (kg) | 120 | 115 |
| Dry weight (kg) | 114 | 103 |
| Power/weight ratio | 0.057 | - |
| Overall height (mm) | 1,125 | 1,175 |
| Overall length (mm) | 1,835 | 1,850 |
| Seat height (mm) | 740 | 785 |
| Ground clearance (mm) | 105 | - |
| Performance | ||
| Fuel capacity (l) | 6.5 | 11 |
| Oil capacity (l) | - | 1.5 |
Help · Contact us · Disclaimer · Contributors · Developers · Donate